Tynor Pelvic Traction Kit

Tynor Pelvic Traction Kit-Small

• Traction system is intended to apply uniform and controlled traction to the lumbar, sacral and thoracic areas of the vertebral column.
• Pelvic traction belt, like a halter holds the pelvic area. Pelvic traction belt through its straps on the two sides get attached to the spreader bar, traction pulley bracket and the weights.
• The flexible pulley arm can be adjusted at various angles to suit the individual needs of the traction type, the bed or the patient.
• Traction Weight Bag can be custom filled to get weight from 1 to 12 Kgs using water or sand. Easy to use and convenient to store.
• Comprises of a Pelvic Traction Belt, a Spreader Bar, Traction Pulley Bracket, a Traction Cord and a Weight Bag.

Product Description

Tynor Pelvic Traction kit is a traction system intended to apply uniform and controlled traction to the lumbar, sacral and thoracic areas of the vertebral column. Pelvic traction belt, like a halter holds the pelvic area. Pelvic traction belt through its straps on the two sides get attached to the spreader bar, traction pulley bracket and the weights. Pelvic traction kit comprises of a Pelvic Traction Belt, a Spreader Bar, Traction Pulley Bracket, a Traction Cord and a Weight Bag.

Application

1. Lumbar Spondylytis
2. Inter vertebral disc syndrome.
3. Low back ache
4. Postural fatigue, postural deformities.
5. Mechanical stress due to poor posture.
6. Stabilization during vertebral fractures or injuries.

Instructions

1. This equipment should be used under the strict guidance and vigil of a qualified doctor only.
2. Discontinue use and seek guidance of a qualified doctor, in case of
   1. Impaired sensation.
   2. Impaired blood flow.
   3. Allergy rash or itching.
   4. Pain increases or persists.
3. Consult your doctor in case of concurrent use of another medical device.
4. Misuse or improper use of the product can lead to adverse effects and decreased effectiveness.
5. Keep out of reach of children.
6. Adjust Hook loop closure for a secure and comfortable fitting

How to use:

The circumference of pelvic area is measured to choose the right size of Pelvic Belt. The belt is wrapped around the pelvic portion with the traction straps on the bottom side. The traction straps are hooked to Pelvic Traction Spreader Bar and Traction Pulley Bracket. Spreader Bar helps in balancing the traction force equally on both sides of the body.The weight of traction should be carefully calculated by an experienced orthopedic doctor and a corresponding counter traction can be calculated.For effective traction, patient should be made to lie on a hard and a smooth surface or a hospital bed.

Product Care

Washing instructions for P T Belt and Traction Cord
1. Cold wash in mild detergent without wringing
2. Dry in shade on a flat surface
3. Do not iron or dry clean
4. Do not use brush

Cleaning Instructions for PT Pulley Bracket and PT Spreader Bar, Weight Bag
By a simple wet wipe with or without detergent