Tynor Walker Invalid’s Reciprocating All Pods – Universal Size

Tynor Walker Invalid’s Reciprocating All Pods-Universal Size

• Provides perfect support to weak patient and strong body provides high load bearing capacity of upto 110 KG.
• Easy to shift between conventional & reciprocating mode. In reciprocating mode no need to lift the walker,natural walking action and two pods always remain on ground.
• “Foldable depth of 10 cm ensures easy to carry,fold and tarnspport.
• Anti slip and enhanced grip increases confidence of the user.
• Easy to adjust height, easy to clean, light weight, excellent aesthetics,long functional life and durable.

Product Description

Tynor Walker Invalid?s is a convenient device to allow the patient to be mobile even with the high degrees of disability, because of old age, nervous disorder, fracture, disease, injury etc. This is designed to provide side to side reciprocating natural gait motion with minimal lift off the floor surface. Ideal for users with limited strength or those that may require maximum stabilization.

Application

1. Lower Limb fractures.
2. Lower limb amputations
3. Post-surgical recovery
4. Neurological conditions
5. Hemiplegia / Foot drop
6. Osteoporosis condition.
7. Knee and hip arthritis.
8. Postural sway due to weakness.”

Instructions

1. Use this product under strict guidance of a qualified therapist.
2. Consult your therapist in case of concurrent use of another medical device.
3. Misuse or improper use of the device can lead to adverse effects and decreased effectiveness.
4. Follow instructions mentioned in the user manual carefully.”

How to use:

Adjusting the Walker Height.

1. Unfold the walker.
2. Stand straight within the walker frame with shoulders relaxed and arms hanging loosely at user?s body side.
3. Adjust the height of the walker by moving all four legs one by one using push button.
4. The handgrip position should come to the wrist crease.
5. The elbows should be in slightly bent position, while the hands are holding the handgrips.

Using walker

1. After Height adjustment.
2. Stand inside the walker frame holding it from its handgrips.
3. Push it forward at small distance.
4. Now take small steps to move inside the frame.
5. Keep on repeating this action for maneuvering.
6. Don?t take sharp turns, rather take short steps while turning.

How to stand using walker.

1. Bring the unfolded walker close to you while in sitting position.
2. Slide ahead while in sitting position holding the walker frame with one hand.
3. Now use other hand as a support to stand up.
4. Grab the other side of the walker.
5. Be a comfortable position to use the walker.

How to stand using walker.

1. Come close to the article on which you need to sit.
2. Rotate slowly along with the walker so that your back faces the article.
3. Now move back slowly till the article is close enough to sit.
4. Use one hand to hold the article and support yourself while sitting.
5. Slowly sit on the article at the same time holding the walker with other hand as support.

Recommendation:

• Choose walker under the guidance of the therapist according to the patients need.
• Accurate height adjustment extremely important for proper posture and effective use of the product.

Product Care

1. Wipe with a clean moist lint free cloth.
2. Periodically check and replace the tips for excessive wear after use.
3. Do not use solvents such as acetone, Lacquer thinner, turpentine or any petroleum product to clean the parts.
4. Remove any accumulation in the wheel periodically.