Tynor ROM Knee Brace 22 inch/ 56cm – Universal Size, Black
Roll over image to zoom in
Tynor ROM Knee Brace 22inch/56cm (Immobilization at any angle, comfortable)-Universal Size
- It provides easy ROM angle adjustments and controlled motion with immobilization at any angle.
- Range of motion from 0 to 120 degree flexion and 0 to 60 hyperextension with locking intervals at 15 degrees.
- Good aesthetics, easy pull mechanism,Effective product grip and improved cushioning.
- Easy to use, comfortable and durable.
- One size fits all.
Product Description
Tynor ROM knee brace 22″(universal) has motion range from 0 to 120 degree flexion and 0 to 60 hyper extension with locking intervals at 15 degrees. Pleasurable locking, using easy pull mechanism. Straps with reverse buckle mechanism provides controlled tightening. It is easy to wear.
Application
- Prevents the knee joint from unexpected load and motion.
- Postoperative treatment and rehabilitation
- Stability to the weak / injured knee joint
- To prevent an excessive range of knee joint motion.
- ACL PCL injuries
- Osteoarthritis of the knee
Instructions
- Use this product under strict guidance of a qualified doctor
- Adjust padding and strapping for a secure and comfortable fitting.
- Discontinue use and seek guidance of a qualified doctor, in case of
- Impaired sensation
- Impaired blood flow
- Allergy rash or itching
- Pain increases or persists
- Misuse or improper use of the product can lead to adverse effects and decreased effectiveness.
- Follow the instructions mentioned on the box carefully.
- Keep out of reach of children.
How to use
- Ensure, that both the hinges are upright as per the arrow mark and the bending is in line with knee bending.
- Affix the two hinges on the two sides of the knee joint so that the centre of the MPFGD coincides with axis of the knee.
- Wrap the Velcro bands around the leg one by one carefully passing them through the slots in the PP buckle on the hinge
- Fasten the Velcro strips with the reverse buckling to a comfortable, secure grip.
Angle of the knee or motion adjustment
- First set the Flexion angle
- Pull the knob lightly, rotate and release at the desired angle marked on the graduated disc.
- Bend the knee and ensure the desired flexion angle of the knee is attained.
- Then set the Extension angle.
- Pull the knob on the extension side lightly, rotate and release at the desired angle marked on the graduated disc.
- Repeat the above process for the other hinge.
Movement and Immobilisations:
- When immobilization at a particular angle required
- Move both, flexion as well as extension knobs to the same desired angle on the graduated disc
- When flexion movement is required between any two angles
- Move the flexion knob to the angle corresponding to higher degree of angle and the extension knob to the hole corresponding to lower degree of angle.
- When neither flexion immobilsation or flexion movement is required then both the pins be affixed at 0 / lock position
- When free flexion movement of the leg. Place flexion knob at 120 degree and extension knob at 0 degree.
Product Care
- It is recommended to close hook loop fasteners before washing
- Hand wash with mild detergent and water below 30?C without wringing.
- Dry in shade on a flat surface,
- Do not dry-clean.
- Do not Iron.
- Do not bleach
Additional information
Weight | 0.5 kg |
---|---|
Dimensions | 30 × 20 × 15 cm |
No more offers for this product!
General Inquiries
There are no inquiries yet.
Reviews
There are no reviews yet.